When printing light colours (e.g. yellow) on dark garments it is necessary to print a white base underneath.
Screens are cleaned off and used for other designs. This is why repeat jobs need to be set up again.
Surfaces with undulating textures cause screen printers the most concerns
Depending on the design, normal halftone reproduces at 45-65 dots per inch.
The industry standard reject rate for screen printing is about 1-2%
Four colour process printing on fabric or nylon is not the same quality as offset printing
Items multiple layers of fabric thick cannot be printed in more than one colour. The product may move before the next colour is applied and accurate registration is not possible.
Printing “around the side” or “off the edge” of shirts is not possible. Products need to be laid flat in order to print.
Whenever possible, a sample should be sent with repeat orders to ensure an identical product
Garments cannot be printed across a seam. If a print up to the seam is required, the flat panels should be printed before the item is made up.
If you have any questions relating to promotional products, please don’t hesitate in contacting us. JEM Promotional Products Phone: (02) 8205 1334 E-mail:enquiries@jempp.com.au
JEM Promotional Products is an active member of these industry associations:
SIGN UP TO OUR NEWSLETTER
By submitting this form, you are consenting to receive marketing emails from: JEM Promotional Products, Unit 10, 7-9 Progress Circuit, Prestons, 2170, https://www.jempp.com.au. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact
